GUL Code Zero Jacket GCX4 4-layer
GM0200 Yellow Zip
Please choose an option:
Code Zero Mens Jacket GCX4 4-layer fabric
The Code Zero race jacket has been designed using Guls' technical 4 layer fabric for extreme wet, cold and windy conditions, GCX4 fabric will keep you warm, dry and safe. Allowing you to experience complete harmony with the conditions.
GCX4
For extreme wet, cold and windy conditions, GCX4 fabric will keep you warm, dry and safe. Allowing you to experience complete harmony with the conditions. The challenge never ends. The highly advanced GCX4 four-layer fabric is specifically engineered to fit the demanding use over time.
Waterproof - 20 000 mm Breathability- 10 000 g/m/24h. All seams fully taped for long lasting extreme waterproofness. WINDPROOF WATERPROOF Protects from wind and water penetration OUTERLAYER Water resistant, breathable high performance shell. MIDLAYER Waterproof, breathable coating INNERLAYER Wicking polyester tricot.
BREATHABLE Allows condensation and perspiration to escape.
All seams are fully taped for long lasting extreme water proofness. Designed with Cordura reinforced seat panel and 3 way adjustable, hi-vis stowaway hood. The Code Zero Jacket provides a performance weight, breathable, waterproof and windproof outer layer.
Tech Guide:
- GCX4 Breathable, waterproof, hard wearing
- 4 layer fabric
- 100% Waterproof heat taped seams
- CORDURA?: reinforced seat panel
- YKK AQUAGUARD: 2 way W/R front zip
- Stow-away, 3-way adjustable hood
- Internal PU adjustable cuffs
- Adjustable outer cuffs
- Elasticated easy-grab hem adjuster
| Size | Waist | Height |
| XS | 28” - 30” (71 -76 cm) |
32” - 35” (81 - 89 cm) |
| S | 28” - 30” (71 -76 cm) |
35” - 38” (89 - 96.5 cm) |
| M | 32” - 34” (81 - 86 cm) |
38” - 41” (96 - 104 cm) |
| L | 34” - 36” (86 - 91.5 cm) |
41” - 44” (104 - 112 cm |
| XL | 36” - 38” (91.5 - 96.5 cm) |
44” - 47” (112 -119 cm) |
| XXL | 38” - 40” (96 -101.5 cm) |
47” - 50” (119 - 127 cm) |
Aftercare:
Your jacket has been made from carefully selected materials to give the best combination of durability and performance. With the correct care you will gain the maximum life from your jacket. Always rinse your jacket after use, in clean water using a mild detergent if necessary. Pay particular attention to remove any sand or foreign matter from the zips. Please don’t use any solvents or other chemicals to remove stains or marks from your jacket as this can cause damage. Do not force zips and if possible get someone to pull up the zips for you, pulling zips up not across. Protect your jacket from sharp or abrasive objects. Ensure the jacket is the correct size and do not pull the ends of the sleeves to remove.
